AIRCRAFT PARTS & TOOLS
I have many pieces of NEW Old Stock Aircraft Fittings & Hardware
Compression Tester
 Back side has some Scuff Marks & Light Surface Rust  Tip has valve similar to those found on tires, possibly to hold reading  I have no idea of the condition of the calibration on this, therefore it is being sold in As Is, Unknown Condition. |
Threader Tool with ⅜'' DieThis may or may not be an aircraft tool   I wiped the dirt off the Die & found it is marked ⅜'' with brand name Triad  The Die is also marked NYE & D51  Possibly these markings help you determine the thread type & threads per inch. |
Please Help me Identify the following
|
 The main part of this that holds the cutting bits measures about 8'' or about 20.32 cm in length by about 1-⅞'' (1.875 inch) or about 4.7625 cm in diameter. Bits are numbered 1, 2, 3, 4  The ''attachments'' shown below fit into this channel  Threads in top end appear to show little or no signs of abuse  ''Attachments'' slide into channel shown above  2 sets of replacement cutting bits  These have some Scuff Marks & or Light Surface Rust. This item & accessories weighs about 4½ pounds Before packing. |
 These all have part numbers on them. p/n R2P500  This measures about 10'' or about 25.40 cm in length.  This measures about 1'' or about 2.54 cm in diameter on the smaller end.  This measures about 1-¼'' (1.250 inch) or about 3.175 cm in diameter on larger end. p/n R2P437  This measures about 4-¼'' (4.250 inch) or about 10.795 cm in length.  This measures about 1-⅞'' (0.875 inch) or about 2.2225 cm in diameter on the smaller end.  This measures about 1'' or about 2.54 cm in diameter on larger end. p/n 1949  This measures about 1-¾'' (1.750 inch) or about 4.445 cm in height by about 1-15⁄16'' (1.9375 inch) or about 4.92125 cm in diameter on part number side.  This measures about 2-1⁄16'' (2.0625 inch) or about 5.23875 cm in diameter on opposite side. With the hole measuring about 1'' or about 2.54 cm in diameter. p/n 1983  This measures about 1-¾'' (1.750 inch) or about 4.445 cm in height by about 1-31⁄32'' (1.96875 inch) or about 5.000625 cm in diameter on part number side.  This measures about 2-3⁄32'' (2.09375 inch) or about 5.318125 cm in diameter on opposite side. With the hole measuring about 1'' or about 2.54 cm in diameter. p/n 2083  This measures about 1-¾'' (1.750 inch) or about 4.445 cm in height by about 2-1⁄16'' (2.0625 inch) or about 5.23875 cm in diameter on part number side.  This measures about 2-7⁄32'' (2.21875 inch) or about 5.635625 cm in diameter on opposite side. With the hole measuring about 1'' or about 2.54 cm in diameter. These have some Scuff Marks & or Light Surface Rust. This group of items weighs about 8½ pounds Before packing. |
 These measure about 1-5⁄16'' (1.3125 inch) or about 3.33375 cm in height by about 1-½'' (1.500 inch) or about 3.81 cm in diameter, with the hole measuring about 1-1⁄16'' (1.0625 inch) or about 2.69875 cm in diameter. These have some Scuff Marks & or Light Surface Rust. This pair of items weighs about 10 ounces Before packing. |
*** Please note that measurements may not be accurate & were taken with a ruler, a magnifying glass & my bad eyes, as I do not have a micrometer.
You may email us.
Click on mailbox.